The production arrives with nearly every page stamped “HIGHLY CONFIDENTIAL – ATTORNEYS’ EYES ONLY,” and the client wants copies tonight. Or the shoe is on the other foot: your client’s pricing data is about to go to a former business partner, and you need it protected from the person, not just from the public. Either way, attorneys’ eyes only is a powerful designation, and its rules come from the protective order in your case.
This guide is for attorneys, paralegals and litigation-support staff. It covers what AEO is, how it differs from other confidentiality tiers, who can usually see it, how to designate and challenge it, how it plays out in family-law and small-firm matters, filing under seal, and day-to-day handling. It is general information; the order in your case and your court’s rules control.
What does attorneys’ eyes only mean?
Attorneys’ eyes only is a confidentiality tier in a protective order that restricts designated discovery to the receiving party’s lawyers and a short list of others, keeping it from the receiving party itself. It exists only because an order creates it.
In federal courts, protective orders rest on Rule 26(c), which lets the court, for good cause, protect a party or person from annoyance, embarrassment, oppression or undue burden or expense. One listed option is requiring that a trade secret or other confidential research, development or commercial information not be revealed, or be revealed only in a specified way. A motion for a protective order must certify a good-faith attempt to confer first. Many state rules are modeled on Rule 26, and in practice most AEO tiers come from stipulated orders the parties negotiate and the court enters.
The Federal Judicial Center’s Confidential Discovery: A Pocket Guide on Protective Orders describes the purpose plainly: sometimes a party is concerned not only about outsiders but about the opposing party seeing discovery, and trade secrets are the common example. It also notes that AEO designations under a blanket order are provisional and must be supported by good cause if challenged.
What is the difference between confidential, highly confidential and AEO?
The tiers differ by who may see the material. Names vary between orders, so map each label to its definition before handling anything.
| Tier (common label) | Who usually may see it | Typical material |
|---|---|---|
| Confidential | The parties, counsel, staff, experts and the court, for this litigation only | Personal financial records, non-public business documents |
| Highly Confidential – Attorneys’ Eyes Only | Outside counsel and staff, approved experts, vendors and the court; not the receiving party | Trade secrets, pricing, customer lists, competitive plans |
| Additional tiers in some orders | Narrower still, such as outside counsel only or a restricted source-code review room | Source code, highly sensitive technical data |
Who can usually see AEO material?
Outside counsel and a defined list of others, each named in the order. A typical access list includes:
- Outside counsel of record and their paralegals and staff
- The court, court personnel and court reporters
- Retained experts and consultants who sign the order’s acknowledgment
- Litigation-support, copy and e-discovery vendors working on the matter
- The author, addressees and recipients of the document
- Mediators, if the order includes them
Two points cause most of the friction. Many orders require advance disclosure of an expert, with a window for the producing party to object. And in-house counsel access is often negotiated: the FJC guide observes that the concern may turn on whether a person is a competitive decision-maker, which is why outside counsel sometimes raise less concern than in-house counsel.
What should an AEO provision cover when you negotiate the order?
Most AEO problems trace back to a gap in the stipulated order. When the draft comes in, check that it answers these questions:
- A definition of AEO material that is narrower than the Confidential tier
- The access list, including whether in-house counsel or a named client representative is included
- Expert disclosure, the objection window and the acknowledgment form
- Whether counsel may advise the client in general terms based on AEO material
- The challenge procedure, deadlines and who bears the burden
- Filing under seal and use of AEO material at hearings
- Late designation, inadvertent disclosure and return or destruction at the end of the case
How do you designate material as attorneys’ eyes only?
Designate deliberately, document by document, and make the designation impossible to miss.
- Apply the order’s definition. Designate only what meets the AEO standard; blanket designation invites a challenge and erodes credibility with the court.
- Stamp every page. Place the legend near the Bates number on image or PDF productions; see our Bates numbering guide.
- Mark native files. Put the designation in the file name, on a slip sheet and in a load-file field.
- List designations in the production letter. Give Bates ranges for each tier so the receiving side can route material correctly.
- Designate testimony. Use the order’s procedure for designating deposition testimony on the record or within a set period after the transcript arrives.
- Fix mistakes promptly. If something went out undesignated, follow the order’s late-designation provision and send replacement copies.
Confidentiality designations are not privilege. Privileged material is withheld and logged, as our privilege log guide explains, while AEO material is produced with restrictions. Personal identifiers may still need redaction on top of a designation; see redacting exhibits.
How do you challenge an over-designated production?
Follow the challenge procedure in the order, which usually means written notice, a meet-and-confer, then a motion. Challenge specific documents, not the production as a whole, and offer practical alternatives such as re-designating to Confidential or producing redacted versions.
Example
In a fictional dispute between the former co-owners of Halvorsen Supply, the defendant produces 4,200 pages and designates 3,900 of them AEO, including the plaintiff’s own emails from when he ran the company and the company’s publicly filed annual reports.
The plaintiff’s paralegal builds a challenge chart with columns for Bates range, neutral description, current designation, why the client needs to see it and proposed tier. Counsel sends written notice covering three categories and meets and confers. The producing side agrees to move the plaintiff’s own emails and the public filings to Confidential. The current pricing spreadsheets stay AEO, and the remaining dispute goes to the court under the order’s procedure, with the material treated as AEO in the meantime.
How does AEO work in family-law and small-firm cases?
AEO appears in family matters more often than many clients expect: a spouse’s closely held business records, a valuation expert’s working files or a third party’s financial information. The hard part is usually the client relationship. A client who is used to seeing everything may read an AEO restriction as the lawyer keeping secrets.
The ethics rules anticipate this. Comment 7 to ABA Model Rule 1.4 notes that rules or court orders governing litigation may provide that information supplied to a lawyer may not be disclosed to the client, and that Rule 3.4(c) directs compliance with them. Practical steps:
- Explain early that some discovery may be counsel-only, before the first production arrives.
- Use an expert, such as a forensic accountant who has signed the acknowledgment, to analyze the material.
- Ask for redacted or summary versions the client can see, or a re-designation of specific documents.
- Seek a modification if the client’s participation is essential to the defense of the case.
Small firms face a structural risk: the same staff handle client communication and productions, so AEO material can slip into a client portal or an email thread. See our guide to discovery in divorce cases for the wider workflow.
Can AEO material be filed with the court?
Only through the court’s sealing procedure. The FJC guide explains that protected information filed with the court should not be sealed merely because the parties want it sealed; sealing decisions are made by the court. In federal courts, Rule 5.2(d) allows the court to order a filing made under seal, and local rules set out how to request it. Many protective orders also require notice to the designating party before its material is filed.
Build sealing time into motion and hearing deadlines, and ask the court in advance how it wants AEO exhibits handled at a hearing.
How should a team handle AEO material day to day?
Treat AEO as an access-control problem, not just a stamp.
- Keep each tier in a separate folder or repository limited to named people
- Exclude AEO material from client portals, client-shared drives and client email
- Keep signed acknowledgments on file before anyone outside the firm gets access
- Log who received what and when, including experts and vendors
- Send material to experts through a secure share with an expiry; see secure file sharing
- Mark work product that quotes AEO material, such as chronologies and deposition outlines, with the same designation
- Calendar the order’s return-or-destroy obligation at the end of the case
How CourtBriefly helps
CourtBriefly is evidence intake and preparation software for litigation teams: request records, review sources, produce Bates-stamped message logs and assemble source-linked binders. Originals are hashed, exports are exhibit-numbered, and selected release lets your team choose what goes out. Designation decisions, legends and the access list remain with counsel under the order. Compare plans to see what fits your practice.
Start freeFree plan, no card
